How can something that is bacterial be pure?
Bacteria are not the same as dirt. What we commonly refer to as dirt is food for bacteria. Bacteria eat dirt. A common misconception and thought mistake many of us often make is to think of bacteria as dirt. This is completely wrong. Bacteria are a living organism, with a purpose and function that is of essential importance to us: we cannot function without bacteria.
Why should I use the mist?
Because you're doing yourself, your clothes and the environment a big favor. Pure Effects mister removes bad smells, without traditional laundry. It saves hard-to-wash materials and equipment such as helmets, protectors, shoes, etc. Freshening up instead of washing in a washing machine is otherwise smart and resource-efficient - less wear and tear, garments last longer, less water and chemical use. And you can devote your time to something other than laundry.
There are other sprays and linen washes, why should I use Pure Effects?
Most other sprays contain only perfumed water. They don't remove odor, they just perfume over it temporarily. With the bacteria in Pure Effect, you remove the source of the odor, the organic dirt. By continuously spraying your clothes, shoes, etc. with Pure Effect mist, you'll keep bad smells at bay for real. Besides, it's good to surround yourself with good bacteria, rather than living too sterile. Please read more about it in the reference list here at the end of the post.
What garments does the mist work on?
Any garment that withstand water, which is the vast majority of them. The mists are pH neutral and also work for delicate fabrics such as silk, silk, wool, cashmere, sequins, fur , feathers etc. Note: leather and suede, for example, can be stained by water. Try it on a less visible area. However, the lining of suede garments, for example, is often made of textiles thet withstand water and it is the inside that often needs to be misted to be refreshed.
How do the mists work, do they remove both smell and stains?
Mists mainly remove odors. Even stains can disappear immediately, over time or if you spray them several times, but that is not the primary function. Odor removal is a two-step process:
- Direct acting: a protein that breaks down odor molecules. It happens directly when you spray.
- Long-acting: the micro-organism Bacillus Subtilis, one of the most common soil bacteria, effectively breaks down organic matter without releasing odorous substances.
Why should I use All Clean, why do you think it's better than Ajax, Chlorine and soap for example?
There are a lot of reasons why All Clean is better than traditional chemical and disinfectant products. All Clean effectively removes greasy dirt (fatty acids/triglycerols) which is a key cause of surfaces (stove/floor/table/chair, etc) being perceived as dirty. Grease is 'ugly' because it causes a stain, it is disgusting to touch, it smells foul and it acts as a mortar for other molecules/particles. These particles stick to the grease and make the surface even dirtier.
Traditional chemical cleaning products are designed to dissolve grease and usually do a good job of it. But the function of these chemical cleaning products is one-dimensional in that they just move the dirt away, down the drain. Once down the drain, the chemical's influence on the grease will wear off, again creating the problem of clogged drains/smelly floor drains.
All Clean's function is not based on moving grease from a surface and down the drain. All Clean's function is based on cutting up the grease and making it into a molecule that is easy for bacteria to 'eat' (break down) on the spot. All Clean also contains bacteria that are effective grease eaters, bringing the biological treatment steps of the water treatment plant directly to bear on the 'dirt' in your home.
As for chlorine, it's a big 'NO NO'. Chlorine bleaches and kills bacteria. Bleaching is hard on materials and the disinfecting function is neither desirable nor sustainable: chlorine is bad for you as a living organism, it is bad for the biological treatment processes of water treatment plants and thus bad for the 'environment'.
Soap is an ancient product made from fat and a high pH chemical (common is potassium lye). The first soap factory in Sweden was established in 1823. Much has happened on the cleaning front since then and things have undoubtedly improved. Soap is a greasy alkaline cleaning product, it has a high pH which means that greasy dirt is soaked away. In the past, soap was used because there was simply nothing else available. Soap was used to dissolve greasy dirt and at the same time re-stain the material, floor or carpet. In carpets, soap was used to fill textile pores with grease to prevent them from absorbing more dirt, but a good result requires that you are prepared to put in a lot of time and effort. The grease in the soap has to be worked into the material. If this doesn't happen, all that will happen is that you will have a greasy surface that smells of 'soap' and will attract other dirt.
All Clean's cleaning function is based on cutting the greasy dirt. The decomposed greasy dirt can then be easily sucked up into a cleaning cloth and if you give the bacteria in All Clean some time, they will eat up the greasy dirt that you failed to suck up in the cleaning cloth. This means there is less food for odor-causing bacteria and the surface will be clean and odor-free.
Can you use All Clean everywhere and as much as you want?
All Clean can be used anywhere, on any water-resistant surface. Even on textiles for stain removal of most types of organic stains, i.e. non-synthetic stains. All Clean replaces virtually all your previous cleaning products (toilet cleaner, window cleaner, kitchen cleaner, etc.). For a camper van, cottage or boat it is absolutely sufficient. Then you may need to supplement with an acidic product (Clean Bath) to get rid of limescale residue in e.g. bathrooms around taps, in joints etc, and Clean Floor for easier mixing in scrub buckets.
Please listen to our podcast Our bacterial lives - Pure Effect Conversations.